This Husqvarna 1992 WR125 Brake Light Switch works easily by replacing the banjo bolt:
- Works on the front or rear master cylinder.
- No worries, we’ll send the correct thread pitch for the bike model provided in the checkout notes!
- Buy 2x for front and rear brake microsensors.
What’s included with this Husqvarna 1992 WR125 Brake Light Micro Switch?
- Threaded Banjo bolt with a pressure-actuated micro switch.
- This is a connector for most Husqvarna 1992 WR125s with Brembo, but you can cut the two wires and use your old connector if needed.
- Two Copper Crush Washers.
Compatibility/Fitment
This is a list of all the years we carry this part for, yet there may be a different part number from year to year. If your bike is listed, no worries; the product will fit your ride. If any mods are done to the bike, please let us know on the checkout page or in a message after purchase so we can send the correct product for your ride.
Brand | Model | Year |
---|---|---|
Husqvarna | WR125 | 1985 |
Husqvarna | WR125 | 1986 |
Husqvarna | WR125 | 1988 |
Husqvarna | WR125 | 1989 |
Husqvarna | WR125 | 1990 |
Husqvarna | WR125 | 1991 |
Husqvarna | WR125 | 1992 |
Husqvarna | WR125 | 1993 |
Husqvarna | WR125 | 1994 |
Husqvarna | WR125 | 1995 |
Husqvarna | WR125 | 1996 |
Husqvarna | WR125 | 1997 |
Husqvarna | WR125 | 1998 |
Husqvarna | WR125 | 1999 |
Husqvarna | WR125 | 2000 |
Husqvarna | WR125 | 2001 |
Husqvarna | WR125 | 2002 |
Husqvarna | WR125 | 2003 |
Husqvarna | WR125 | 2004 |
Husqvarna | WR125 | 2005 |
Husqvarna | WR125 | 2006 |
Husqvarna | WR125 | 2007 |
Husqvarna | WR125 | 2008 |
Husqvarna | WR125 | 2009 |
Husqvarna | WR125 | 2010 |
Husqvarna | WR125 | 2011 |
Husqvarna | WR125 | 2012 |
Husqvarna | WR125 | 2013 |
Husqvarna | WR125 | WR12 |
Husqvarna 1992 WR125
Guss –
easy option for street legal builds.