This Honda 1989 CR250R Brake Light Switch works easily by replacing the banjo bolt:
- Works on the front or rear master cylinder.
- No worries, we’ll send the correct thread pitch for the bike model provided in the checkout notes!
- Buy 2x for front and rear brake microsensors.
What’s included with this Honda 1989 CR250R Brake Light Micro Switch?
- Threaded Banjo bolt with a pressure-actuated micro switch.
- This is a connector for most Honda 1989 CR250Rs with Brembo, but you can cut the two wires and use your old connector if needed.
- Two Copper Crush Washers.
Compatibility/Fitment
This is a list of all the years we carry this part for, yet there may be a different part number from year to year. If your bike is listed, no worries; the product will fit your ride. If any mods are done to the bike, please let us know on the checkout page or in a message after purchase so we can send the correct product for your ride.
Brand | Model | Year |
---|---|---|
Honda | CR250R | 1988 |
Honda | CR250R | 1989 |
Honda | CR250R | 1990 |
Honda | CR250R | 1991 |
Honda | CR250R | 1992 |
Honda | CR250R | 1993 |
Honda | CR250R | 1994 |
Honda | CR250R | 1995 |
Honda | CR250R | 1996 |
Honda | CR250R | 1997 |
Honda | CR250R | 1998 |
Honda | CR250R | 1999 |
Honda | CR250R | 2000 |
Honda | CR250R | 2001 |
Honda | CR250R | 2002 |
Honda | CR250R | 2003 |
Honda | CR250R | 2004 |
Honda | CR250R | 2005 |
Honda | CR250R | 2006 |
Honda | CR250R | 2007 |
Honda 1989 CR250R
Guss –
easy option for street legal builds.