3 reviews for Dirt Bike Brembo Brake Works Factory
Powered by
4.7
Based on 3 reviews
5 star
66
66%
4 star
33
33%
3 star
0%
2 star
0%
1 star
0%
Rated 5 out of 5
Francisco T –
i seen this on billy bolts bike and had to have it!
Rated 4 out of 5
John Dwulet (verified owner)–
Nice, swapping long lever with shorty required for handguards
Rated 5 out of 5
Pat Johnson –
now that i can afford the best I went all out on my fe501 track build bike. pared with the billet caliper and titanium pistons there is not a chance I’m over heating this kit at the next glen helen 6 hour gp!
hi im looking to upgrade my front master cylinder on my 1990 cr500 for the Brembo Brake Upgrade – Factory Front Master Swap and i just want to know whether the as3 brake line that i have will fit the new master or will i need a new brake line to go with this also this is going to be mounted to the standard nissin caliper will this workdylan asked on December 28, 2023
Will need the matching brembo caliper, yes we have asv options and any brake line will work either.
answered on December 29, 2023store manager
G'Day Mate, I didn't actualy end up with this master cylinder but I will say the AS3 brake lines are my favorit line as they are so adjustible. I have them on my track bike (Road) and on the dirt bike. You should be able to get them to fit though you will have to think out side the box when you fit them as the connection for the line maybe in a different location from the O.E.M. one. The photo shows the master cylidetr fitting is off the side while what I had original was fitted from the back, as the AS3 cable end can be adjusted to any angle (Not fixted) you should able to get it to fit. What I did was loosely fit the banjo with the offset/bend facing the direction of the ridder then rotated it back again behind all the cables so it would not conflict with cables or obstruct the dash placing the brake pressure switch after the banjor as to seal the end rotated down below the bar to keep the routing of the switch as neat as possible. Of course you can measure a custom cable that would bend 90 degrees in-front of the number plate if there is no head light but if you have a head light this may cause a conflict. I personal found the O.E.M. cable langht worked out well with the AS3 adjustable end.
Hi I have a set of Honda 2020 450R Forks(showa 49mm) with the triple tree. I'd like a stock Nissin 11mm master cylinder but with the brake switch. What do I order? Thanks MikeMike Wade asked on March 23, 2021
Hi, only our Brembo's have brake switches, so any Brembo we sell will have a switch none of the Nissin masters will have such.
hi im looking to upgrade my front master cylinder on my 1990 cr500 for the Brembo Brake Upgrade – Factory Front Master Swap and i just want to know whether the as3 brake line that i have will fit the new master or will i need a new brake line to go with this also this is going to be mounted to the standard nissin caliper will this workdylan asked on December 28, 2023
Will need the matching brembo caliper, yes we have asv options and any brake line will work either.
answered on December 29, 2023store manager
G'Day Mate, I didn't actualy end up with this master cylinder but I will say the AS3 brake lines are my favorit line as they are so adjustible. I have them on my track bike (Road) and on the dirt bike. You should be able to get them to fit though you will have to think out side the box when you fit them as the connection for the line maybe in a different location from the O.E.M. one. The photo shows the master cylidetr fitting is off the side while what I had original was fitted from the back, as the AS3 cable end can be adjusted to any angle (Not fixted) you should able to get it to fit. What I did was loosely fit the banjo with the offset/bend facing the direction of the ridder then rotated it back again behind all the cables so it would not conflict with cables or obstruct the dash placing the brake pressure switch after the banjor as to seal the end rotated down below the bar to keep the routing of the switch as neat as possible. Of course you can measure a custom cable that would bend 90 degrees in-front of the number plate if there is no head light but if you have a head light this may cause a conflict. I personal found the O.E.M. cable langht worked out well with the AS3 adjustable end.
Hi I have a set of Honda 2020 450R Forks(showa 49mm) with the triple tree. I'd like a stock Nissin 11mm master cylinder but with the brake switch. What do I order? Thanks MikeMike Wade asked on March 23, 2021
Hi, only our Brembo's have brake switches, so any Brembo we sell will have a switch none of the Nissin masters will have such.
Need help with installation? Get a hold of a live agent.
FAQ
Is Shipping Included?
Yes, there is free shipping on all Dirt Bike Brembo Brake Works Factory‘s in the continental US.
Is fitment guaranteed?
Yes, when all options are selected for the Dirt Bike Brembo Brake Works Factory, fitment is guaranteed.
Do you ship worldwide?
Yes, we ship all products internationally for an additional cost. Additional shipping costs for a product will show when your region is selected on the checkout page under shipping.
What is your product return policy?
With any Dirt Bike Brembo Brake Works Factory for sale online, PayPal, Apple Pay, Google Pay and credit card are covered by a 30-day return/replace policy if the product is defective or if you don’t receive what you ordered. But since most products we offer are customized to your order, we cannot accept returns and provide refunds for non-warranty reasons (but our products are easy to sell on eBay or Craigslist!). Read more here.
How do I speak with a live agent?
Use the Q&A feature on any product page (see the Q&A tab on this page, for example) where you can get product-specific answers to your questions, OR get one-on-one pro help by phone or video using our Pro Direct Connect service.
Dealers, race teams or repair shops… We’ve got something special for you!
Register for a free account as a Dealer and get exclusive access to 15% off on everything you buy from us. It’s easy…
(1) Register now or log-in to your Dealer account.
(2) Connect with us to verify your Dealer status. Just send us an email with information about your shop or shoot us a video on Instagram showcasing what you do.
(3) After you’ve spent $1,000 with us, you’ll qualify for the 15% off discount. Don’t worry if you’re not verified yet… once you are, we’ll reimburse you for 15% off on everything you purchase over the initial $1,000 buy-in threshold, and from then on your discount will automatically apply to everything you add to your cart (just log-in before you shop)!
Shop today and you’ll be getting 15% off everything you buy in no time!
Need Help? You've got options...
Use the Q&A feature on any Product page… just find a product you’re interested in and scroll down the page to find the Q&A tab. There you can ask your product-specific question and get an answer from our pro team.
FOR ORDER-RELATED SUPPORT NEEDS… Just reply to the Order Confirmation email you received after you placed your order. It will have the order # in the subject line. In your email, tell us in detail what you need help on and attach photos if needed.
*Please be sure to reply to your Order Confirmation email with the order # in the subject line or we may not respond to your support request.*
Francisco T –
i seen this on billy bolts bike and had to have it!
John Dwulet (verified owner) –
Nice, swapping long lever with shorty required for handguards
Pat Johnson –
now that i can afford the best I went all out on my fe501 track build bike. pared with the billet caliper and titanium pistons there is not a chance I’m over heating this kit at the next glen helen 6 hour gp!